pc gaming pr

The Gigabit Hulk


Case: Corsair Graphite 760T Full Tower

Motherboard: Gigabyte GA-X99-Gaming G1 Wifi Intel LGA 2011-v3 X99 E-ATX

CPU: Intel Core i7-5930K 3.5Ghz Extreme

GPU: nVidia GeForce GTX 780 Ti 3GB GDDR5 Asus ROG Matrix PCI-e 3.0

RAM: AData16GB (4 x 4GB) DDR4 2133Mhz

PSU: EVGA 1300 G2 Watt 80+ Gold Cert. Single 12V

Storage 1: Intel 530 480GBs SATA 6.0Gbps SSD

Storage 2: 2 x 2TB Seagate 7200RPM 64Mb Cache SATA 6.0Gbps on RAID Mirror Intel RST UEFI

Heatsink: Corsair Hydro Series H110 280mm Closed Loop Water Cooling System

Optical: Asus SATA DVD-RW DL 24x


Rosewill Multi Card Reader USB 3.0

9 x Corsair 140mm Green LED Case Fans

1 x Bandi Tech Slot Switch

1 x 5 Meter Multi Color Sound Activated LED Lights

4 x Custom Red Soldered LED Strips


Microsoft Windows 8.1 Pro 64bit


Case Soldered LEDs with back switch


The Gigabit hulk is one of our proudest pcs we've created in bandi tech. it started when our client omar brought us his barely usable alienware aurora for be fixed. he had been COMPLAINING that since he bought it, it has been nothing but problems were as a result he barely used due to down time. we talked about repairing it.. but then things got interesting when he asked "what if we scrap this and you guys make me a new one?"... of course we did.

focused on looks and power our client wanted something that looked as powerful as if performed. after researching some time we learned how to integrate sound activated leds to our build, and so, our first multi color sound activated pc was set into motion. yet omar wanted power and being a fan of the incredible hulk, he even wanted it to have its colors... alas it all came through. 

it is with great pride that we present the gigabit hulk, bandi tech's most powerful and sexiest build till date (sept 18, 2014). 

To see more at our facebook page too! Finally, these high quality pictures is thanks to our friend Mario Stephano Fong from MSF Photography. Click Here to learn more about his photography. 

Other PC facts: 

·         Builder:  Ishla Alicea

·         Modder: Paul Bangdiwala

·         Build Date - Thursday, september 18, 2014

·         Build yours: Starts at $949.99


  1. Make sure you but the ir receiver close to a fan mesh and carefully solder the converter to a molex.

  2. to make the top part cover 'hover', glue permanently fan screws below their magnet points.

  3. you can install a dual 140mm water cooling and even add a third 140mm fan for maximum exhaust!

  4. multi color led lights will make your pc run faster... tested! 



•    Case: Ultra Defender II Mid Tower
•    Motherboard: AsRock Z87 Extreme 4 LGA 1150 
•    CPU: Intel Core i7-4770K 3.5Ghz Haswell
•    GPU: Asus nVidia GeForce GTX 660 PCI-e 3.0 1020Mhz 2GB GDDR5 Direct CU
•    RAM: G.Skill Ripjaws 8GB (2 x 4GB) DDR3 2400Mhz PC3 19200 F3-2400C10D-8GZH
•    PSU: OCZ ZT Series 750Watt 80+ Bronze Certified Fully Modular Single 12V Rail
•    Storage 1: OCZ 60GB SSD 6.0Ghz Cache Drive
•    Storage 2: 1TB Seagate 7200 RPM 3.5" 6.0Ghz
•    Heatsink: Corsair Hydro Series H50 120mm Closed Loop Water Cooling System - Push-Pull
•    Optical: HP SATA DVD-RW DL Lightscribe


•    2 x Masscool 120mm Fan Filters
•    2 x Ultra Blue LED 120mm Case Fans
•    4 x Corsair AF120 Blue LED 120mm LED Fans
•    1 x Apevia 120mm Blue LED Fan
•    56-Inch Purple 500 LED Strip Lights 


•    Microsoft Windows 8.1 Pro 64bit


•    Case Soldered LEDs with back switch

Version 1.5 

Version 2.0 - Gauchitronix ON


This PC belongs to one of Bandi Tech's Interns and as a member of the Bandi Tech family we WILL "Signaturize" your PC. Having said that, the PC was in good conditions although some software mishaps here and there but it was configured properly. 

Our newest intern began working for us just 4 days before we went to the Optico Fiber event. Seeing a great potential in our padawan we decided to reward him by ordering a couple of parts to make he's PC into a Signature PC.

Even under the stress that the upcoming week we were also going to Kaisen Anime Fest, we managed to rebuild his PC and be able to host it at the event. LEDs we soldered afterwards, which is why Ver. 1.5 is the PC feature in event. Click Here to read on the event or Click Here to learn more about our photographer for the Kaisen Event: Mario Stephano Fong.

Finally, the LEDs were installed, a whopping 500 diodes in total. This PC can brighten up your room if you light fixture ever fails. Aside from the cosmetics, this PC packs a punch with at i7-4770K and an Nvidia GTX 660 most games will play above 30fps on a 1080p monitor and PCs tasks... let's not even bother. Gauchitronix is now POWERED ON.

Other PC facts: 

·         Builder:  Carlos Cobian

·         Ver 1.0 Builld Date - May,2014

·         Ver 1.5 Builld Date - Friday, July 18,2014

·         Ver 2.0 Builld Date - Tuesay, August 5,2014

·         Build yours: Starts at $749.99

Hints for building a similar PC:

  1. To fit a H50 Corsair water cooling, we had to sand down the acrylic windows on the Ultra Defender case, this case proved to be unfriendly to water cooling system, even this basic ones.

  2. Use an isolator when shrinkwrapping the LEDs after soldering, you don't want the poles to touch.

  3. If you make a mess during your PC building, don't worry, that's why you have an intern!