computadoras gaming

The Gigabit Hulk

Parts

Case: Corsair Graphite 760T Full Tower

Motherboard: Gigabyte GA-X99-Gaming G1 Wifi Intel LGA 2011-v3 X99 E-ATX

CPU: Intel Core i7-5930K 3.5Ghz Extreme

GPU: nVidia GeForce GTX 780 Ti 3GB GDDR5 Asus ROG Matrix PCI-e 3.0

RAM: AData16GB (4 x 4GB) DDR4 2133Mhz

PSU: EVGA 1300 G2 Watt 80+ Gold Cert. Single 12V

Storage 1: Intel 530 480GBs SATA 6.0Gbps SSD

Storage 2: 2 x 2TB Seagate 7200RPM 64Mb Cache SATA 6.0Gbps on RAID Mirror Intel RST UEFI

Heatsink: Corsair Hydro Series H110 280mm Closed Loop Water Cooling System

Optical: Asus SATA DVD-RW DL 24x

 Accessories

Rosewill Multi Card Reader USB 3.0

9 x Corsair 140mm Green LED Case Fans

1 x Bandi Tech Slot Switch

1 x 5 Meter Multi Color Sound Activated LED Lights

4 x Custom Red Soldered LED Strips

Software

Microsoft Windows 8.1 Pro 64bit

Mods:

Case Soldered LEDs with back switch

Briefing

The Gigabit hulk is one of our proudest pcs we've created in bandi tech. it started when our client omar brought us his barely usable alienware aurora for be fixed. he had been COMPLAINING that since he bought it, it has been nothing but problems were as a result he barely used due to down time. we talked about repairing it.. but then things got interesting when he asked "what if we scrap this and you guys make me a new one?"... of course we did.

focused on looks and power our client wanted something that looked as powerful as if performed. after researching some time we learned how to integrate sound activated leds to our build, and so, our first multi color sound activated pc was set into motion. yet omar wanted power and being a fan of the incredible hulk, he even wanted it to have its colors... alas it all came through. 

it is with great pride that we present the gigabit hulk, bandi tech's most powerful and sexiest build till date (sept 18, 2014). 

To see more at our facebook page too! Finally, these high quality pictures is thanks to our friend Mario Stephano Fong from MSF Photography. Click Here to learn more about his photography. 

Other PC facts: 

·         Builder:  Ishla Alicea

·         Modder: Paul Bangdiwala

·         Build Date - Thursday, september 18, 2014

·         Build yours: Starts at $949.99

HINTS FOR BUILDING A SIMILAR PC:

  1. Make sure you but the ir receiver close to a fan mesh and carefully solder the converter to a molex.

  2. to make the top part cover 'hover', glue permanently fan screws below their magnet points.

  3. you can install a dual 140mm water cooling and even add a third 140mm fan for maximum exhaust!

  4. multi color led lights will make your pc run faster... tested! 

Pacific Coolant

Parts


•    Motherboard: MSI 970A-G43 AM3+ ATX
•    CPU:  AMD FX-6300 3.5Ghz Turbo 6-Core
•    VGA:  nVidia GT 610
•    RAM:  8GBs Avexxir Blue- LED DDR3 PC3-17000 (2x 4GB)
•    Storage:  PNY SSD 240GBs SATA 6.0 Gbs
•    Storage 2: 2 x 1TB Seagate Barracuda 7200RPM SATA 6.0Gbs RAID MIRROR
•    PSU:  Corsair CX500 500w 80+ Bronze Single 12V Rail
•    Optical: 24x Lite-On DVD+RW
•    Case: Enermax Ostrog Mid-Tower
•    Heatsink: Corsair H50 Hydro Series

Accessories


•    5 x 120mm Cougar Blue LED Hydraulic Liquid Ultra Silent 1200RPM 64CFM
•    2 x 140mm Cougar Blue LED Hydraulic Liquid Ultra Silent 1000RPM 72CFM
•    8 x 12in Red LED Strips
•    56 in 1 Rosewill Card Reader
•    1 x 280mm Silverstone Magnetic Filters
•    3 x 120mm Masscool Fan Filters
•    Artic Silver 5 Thermal Paste

Software


•    Microsoft Windows 8.1 Pro 64bit


Time to Build

Rise PACIFIC COOLANT!


Briefing

Sorry, no Lore this time. This PCs has very decent specs for what is going to be doing. Slaving away in an office scanning files and syncronizing data is kinda insulting for a 6 core CPU, but heck! we can! The best aspect of this PC's exterior is how we got those LEDs inside the front chassis, we even created a break away point. Finally, since this PC is going to be in a dusty place, we just covered it with "stylish" fan filters. Any questions or comments feel free to leave them, email us, find us on facebook or on the many more links we have at the bottom of this page.

Other PC facts: 

·         Primary Builder:  Ishla Alicea

·         Assistant Builder:  Paul Bangdiwala

·         Ver 1.0 Builld Date - Tuesday, June 22, 2014

Hints for building a similar PC:

  1. This Enermax case while cheap does have many things going for it, especially to frontal bezel that allowed us to put the LEDs.

  2. Enabling the MSI Fast Boot will allow you to boot into Windows 8 in about 8 seconds, but you must have a certified card for that.

  3. This PC will pacify and cool down anybody... Ok... I'm out.

Kryptonite

Parts

  • Motherboard: Asus Sabertooth 990FX R2.0 AM3+ USB 3.0 UEFI BIOS

  • CPU:  AMD Bulldozer FX 8150 Zambezi 3.6Ghz

  • VGA:  Asus AMD Radeon HD 7770 Direct CU 1GB 1020Mhz GDDR5

  • RAM:  4 x 4GB (16GB) Corsair Vengeance Olive Green DDR3 1600Mhz PC3-12800

  • Storage:  Patriot SSD 128GB SATA 3

  • Storage 2:  OCZ Revo Drive PCIE 4x SSD 50GB

  • Storage 3:  Raid 1:  2x 2TB Western Digital 7200rpm SATA 3 HDD

  • Storage 4:  3TB Western Digital Green HDD

  • PSU:  750W Apevia Bronze 80+ Certified with Green Sleeving & 2 x 80mm Green Led Fan

  • Heatsink:  Zalman CNPS 9700 Green LED

 Accessories

  • 5.25in AeroCool Touchscreen Fan Controller

  • 3.5in Rosewill 52-in-one Card Reader

  • 2 x 12in Logisys Green Cold Cathode Lamps  

  • 4 x 80mm Apevia Green LED Fan

  • 5 x 80mm Masscool Air Filters

  • 8 x 18in Green UV Sata Data Cable

  • 3.5in Rosewill Port Replicator: 4x USB 2.0, 1 x Fire Wire & Audio Headers

  • Artic Silver 5 Thermal Paste

 Software

  • Microsoft Windows 7 Ultimate 64bit

Paul Bangdiwala - Owner of Bandi Tech LLC with the Kryptonite Signature PC

The Kryptonite PC, finally completely after many years of pondering.  Paul here: This is my personal computer, it has been with me for many years, though I'm sad to say, I do not possess any pictures of the first time I built it. Before Bandi Tech LLC was made, this PC resided in my room when I lived in my mom's house. Version 1.0 didn't have half of the parts it currently has, but it was a very good computer.

It was in the very PC that I started Bandi Tech, using it as a backup for my data, its multiple drives serving as other OS boot drives, experimentation took hold on this machine. More and more poured in and out of this PC thanks to those early investments, Bandi Tech's Knowledge Base is vast and it put to use everyday.

So on the Bandi Tech history book, the Kryptonite is mayor player, now with version 2.5 its now even more prepared for service our clientele. Get ready for version 3.0, coming soon.

Other PC facts: 

·         Builder(s):  Paul Bangdiwala

·         Ver 1.0 Finished date - Thursday, June 17, 2010.

·         Ver 1.2 Modification Date - Monday, September 19, 2011.

·         Ver 2.0 Modification Date - Saturday, August 18, 2012.

·         Ver 2.1 Last Modification Date - Sunday, September 23, 2012

Hints for building a similar PC:

  1. Buy very good 80mm fans, the limited cooling in the PC force you not to purchase high TDP parts.

  2. As with almost all acrylic cases, install everything inside the case except: motherboard, cpu, vga and ram and make sure to tuck in all the cables under the motherboard before placing it in. 

  3. Don't buy just 100GBs for you main hard drive, we've had to add the PCI-e 4x 50GB drive to coupe with the lack of space, use 250GB and above.

  4. If I work with the Kryptonite all day, wouldn't that make me Lex Luthor? Brb, I'll need to shave my head.